Inserts Grade Overview


YBC301 – Substrate with high strength, in combination with MT-Ti(CN), thin layer Al2O3 and TiN Coating. Suitable for light and midium milling of low alloy steel and non alloy steel, even under unfavorable condition.

YBC302 - Substrate with high strength in combination with CVD coating of MT-Ti(CN) and Al2O3 in fine grain size and stabil structure. High performance in milling of alloy steel and casting steel.

YBC401 - Substrate with excellent toughness, in combination with CVD coating of Ti(CN), thin layer Al2O3, TIN. It is suitable for medium to heavy milling steels and stainless steel

YBM251 - Substrate with good toughness and strength, in combination with Ti(CN), thin layer Al2O3, TiN. Good performance in milling of alloy steel and stainless steel.

YBM253 - Carbide substrate with good toughness and strength, in combination with CVD coating of MT-Ti(CN) and Al2O3 in fine grain size and stabil structure. Univeral grade for milling of steel, stainless steel and difficult material

YBM351 - MT-TiCN+Al2O3 coated carbide grade with very good strength and impact resistance. It is for milling of steel, alloy steel and stainless steel.

YBM152 - Hard medium corn Substrate in combination with TiCN, thick Al2O3 coating. It is suitable for machinig of gray cast iron and nodular cast iron under normal cutting conditions from low to moderate cutting speeds.

YBM252 - Tough K-subtrate in combination with TiN, TiCN, thick Al2O3 coating. For milling of cast iron and alloy steel. For milling of cast iron and alloy steel.

YBM102 - PVD nano-TiAIN coated fine grain hard carbide grade. For light milling of cast iron, hard steel.

YBM202 - PVD nano-TiAIN coated fine grain hard carbide grade. Good performance in combination of toughness and wear resistance. Milling of steel, finishing and semi-finishing of stainless steel, and hightemperature alloys

YBM205 – Special PVD nano-TiAIN coated fine grain hard carbide grade. Good performance in combination of toughness and wear resistance. Milling of steel, finishing and semi-finishing of stainless steel.

YBM302 – Substrate with reasonable hardness and strength + Nano-TiAIN PVD coating. For rough and semi-finish milling of steel and stainless steel.

YBG152 – Substrate with medium hardness and strength + Nano-TiAIN PVD coating. Applicable for rough and semi-finish milling of cast iron.

YBG252 – Ultra fine carbide substrate plus nano-TiALN PVD coating with high strength, thougness and wear resistance. Special for finishing of alloy steel, stainless steel and cast iron.

YNG151 - Applicable for finishing P, M & K ISO Code

YNG151C - Applicable for finish milling P, M and K ISO Code