Chip Breaker Overview


Chip Breaker Overview

 Negative Inserts

Finishing

Special chip breaker in combination with cermets grades. Sharp cutting edge with excellent chip control at small depth of cut and small feed rate. Enable high surface finishing.

Chip breaker for finishing and semi-finishing of steel and stainless steel.

Sharp and positive cutting edge for finishing and semi-finishing of austenitic stainless steel, soft steel, low carbon steel and heat resistant super alloy. Suitable for continuous to light interrupted cut.

Ground inserts with sharp and positive cutting edge. NF with grade YBG102 is best combination for finishing of heat resistant super alloys (Ni-based, Fe-based and Co-based alloys) Vc=40-100m/min

Wiper

Good surface finishing and high feed rate due to wiper technology. For finishing and semi-finishing of steel, stainless steel or cast iron.

Medium Cutting

Main chip breaker for medium machining with continuous or interrupted cut of steel and stainless steel.

Universal chip breaker with stable cutting edge. Suitable for medium machining also with interrupted cut especially for cast iron and steel.

New TC chip breaker in combination with improved YBD152C grade. Stable cutting edge and middle field for High Performance cutting of cast iron and alloy steel. Optimized rake angle and T-Land reduce cutting force and strengthen the wear resistance

Sharp cutting edge with positive multi-rakeangle. Special for the semifinishing of heat resistant super alloys.

Sharp and stable cutting edge for semifinishing of sticky material and austenitic stainless steel. Suitable also for interrupted cut.

Stable flat cutting egde with standard chip breaker for semifinishing of steel and cast iron.

Roughing

Double side type

Positive chip breaker with strong cutting edge for light to medium rough machining of steel and cast iron.

                                                                           

Single side type

Positive chip breaker with strong cutting edge for light to medium rough machining of steel and cast iron.

Chip breaker with optimized pumpy chip breaker geometry and waved cutting edge. Less friction and cutting pressure for less wear and excellent chip performance for light roughing operation in steel, stainless steel and cast iron.

Double side type

Chip breaker with positive geometry for low cutting force. Suitable for roughing operation of stainless steel and steel.

Single side type

Chip breaker with positive geometry for low cutting force. Suitable for roughing operation of stainless steel and steel.

Chip breaker with strong cutting edge and resistent to plastic deformation for single side inserts. Suitable for rough machining with high metal cutting rate for steel and stainless steel application.

HPR chip breaker for bigger single size inserts. Wide chip pocket and stable edge design for heavy roughing operation in steel and cast iron.

Flat insert without chip breaker. Stable insert with high edge strength for roughing operation in cast iron materials.

CBN & PCD

For machining of hardened materials and cast iron (CBN).

Special grades: For machining of non-ferrous metals (e.g. Aluminium) and non-metal materials (PCD)

Ceramic Insert

Ceramic inserts for machining of hardened steel, cast iron and steel.

Positive Inserts

Fine-Finishing

For super finishing: Insert in G tolerance and sharp cutting edge. Suitable for super finishing of small components.

Special grinded chip breaker groove for precision machining and high surface quality. This G-class inserts with a sharp cutting edge and small corner radius for fine finishing operation without vibration.

Special chip breaker in combination with cermets grades. Sharp cutting edge with excellent chip control. For high surface finishing and precision machining.

Finishing

Chip breaker for finishing and semi-finishing of steel and cast iron. Especially for internal machining.

Sharp, positive cutting edge for finishing and semi-finishing of austenitic stainless steel, soft steel and low carbon steel.

Chip breaker with sharp and positive cutting edge. NF combined with

Grade YBG102/YBG105 is best solution for finishing of heat resistance super alloys (Ni-based, Fe-based and Co based material).

Medium Cutting

Chip breaker for medium machining of steel or cast iron. Suitable for internal and external turning.

Upgrade sharp and strong cutting edge for semifinishing of sticky steel and austentic stainless steel.

Medium Cutting

Chip breaker for round inserts. Suitable for semi precision machining and profile modelling machining of steel and cast iron.

Roughing

Flat insert without chip breaker. Stable insert with high edge strength for roughing operation in cast iron materials.

        

Chip breaker with strong cutting edge for light to medium rough machining of steel stainless steel and cast iron. Suitable for internal and external machining.

Recommended chip breaker for rough machining steel materials. Single chip breaker with strong cutting edge. First choice for profile modelling machining.

Aluminium machining

Unique chip breaker design, with sharp cutting edge and positive rake angle. Special edge preparation and surface treatment for better chip control, less friction, less vibration and good surface quality. G-Tolerance inserts for better repeatability.

Chip breaker for aluminum alloy and non ferrous metal machining

G tolerance insert with large rake angle, surface polishing treatment, effectively preventing build up edge and getting high quality machining surface and long tool life.

CBN & PKD

Special inserts G tolerance with brazed CBN or PCD Tip. CBN suitable for finishing of hardened component and cast iron. PCD suitable for finishing of non ferrous metal and non-metal materials.